Section G. Maintenance Belarus – 90/92 Operating manual
85
Operation 16. Changing oil in engine
• Warm up engine up to normal
operation temperature (at least 70°С).
• Put tractor on even terrain, shut
down engine and engage tractor
parking brake.
• Remove cover (2) of oil filling neck
and unscrew drain plug (4).
ATTENTION! Be careful to avoid contact
with hot oil.
Drain oil in proper container for storage of
used oils.
• Put drain plug (4) in place and through
oil filling neck (1) fill fresh motor oil (M-
8DM, М-8G
2
, М-8G
2К
in winter, and М-
10DМ, М-10G
2
, М-10G
2
к in summer)
up the top mark of oil measuring rod
(3).
• Put cover (2) of filling neck in its
place.
• Start the engine and let it operate for
1-2 minutes.
• In 10 minutes after engine stoppage
check oil level using oil measuring rod
(3).
• If necessary, fill oil up to the required
level.
https://tractormanualz.com/
To Next Page
Loading...