MTX THUNDER SERIES - Key Features; Speaker Installation

MTX.COM
2
Thank you for choosing MTX THUNDER Series speakers for your home theater or distributed audio
system. Properly installed and operated, these speakers will provide years of worry-free listening
pleasure.
KEY FEATURES
• Kevlar Woofer Delivers Accurate Low Frequencies
• Teteron Tweeter Produces Clear High Frequencies While Minimizing Resonance
• Pivoting Tweeter Allows for Proper Sound Imaging
• 12dB/octave High Pass and 6dB/octave Low Pass Crossover
• Mylar High Pass Capacitors
• High Temperature Woofer and Tweeter Voice Coil Wire
• Compression Style Input Terminal Accepts Up to 8-AWG Speaker Wire
• Front Mounted Tweeter Level Control
• Round and Square Paintable Magnetic Grilles Included (Square Only w/ T265LCR)
SPEAKER INSTALLATION
MTX THUNDER Series speakers can be installed in both in-ceiling and in-wall applications allowing
them to blend within any interior decorating scheme. Speaker placement is critical to maximizing the
performance of the speakers within the system. Achieve the best stereo reproduction by installing
two loudspeakers an equal distance from the listener’s position and separated so that the speakers
and the listener form an equilateral triangle, with all sides of the triangle being the same length. In
multi-channel applications the same principle applies for both the front and rear speakers with the
addition of a center channel speaker directly in front of the listener’s position.
Listener