Need help?Do you have a question about the MTX thunder 2300x and is the answer not in the manual?
Adjusting the input gain for optimal sound and distortion-free output.
Circuit for adjusting low-frequency response and enhancing bass.
Setting the crossover point for high-pass or low-pass filtering.
Information on amplifier fuses, types, and replacement procedures.
Connecting the main positive power supply from the battery.
Establishing a secure ground connection for proper operation.
Setting the amplifier's gain to its minimum level.
Setting the volume on the head unit to approximately 3/4 max.
Increasing right channel gain until audible distortion occurs.
Important safety guidelines to follow during installation.
Securely connect the amplifier's ground wire to the chassis.
Verify that the amplifier and system are functioning correctly.
Fine-tune gain controls for optimal sound output.
Results of amplifier testing at a 4-ohm load.
Results of amplifier testing at a 2-ohm load.
To Next Page
General