Need help?Do you have a question about the MTX Road Thunder RT251D and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Peak Power | 500W |
| Frequency Response | 20Hz - 20kHz |
| THD at Rated RMS Power | <1% |
| Bass Boost | 0-12dB |
| Bass Boost Frequency | 40Hz |
| Signal to Noise Ratio | 80dB |
Guidance on reading the manual before installation and contact information for support.
Lists key technological advancements and design aspects of the amplifier.
Controls used to match amplifier input sensitivity to the source unit's output level.
Equalization circuit to enhance low frequencies, adjustable for personal taste.
Input jacks for source units with RCA or Line Level Outputs, specifying voltage requirements.
Outputs for sending signals to other amplifiers in a daisy-chain configuration.
Input for source units with speaker-level outputs, enabling auto turn-on.
Color coding for speaker-level input wire harness connections to source units.
Details on amplifier fuses, their purpose, and replacement guidelines.
Main power input connection to the battery, including cable size recommendations.
Requirements for a quality ground connection for optimal performance.
Connection for 12V signal to turn the amplifier on, typically from the head unit.
Terminals for connecting speakers, emphasizing polarity and impedance caution.
Indicator light status for power application or amplifier overheating.
Contact information for warranty support and inquiries.
To Next Page
