Why is the bass weak on my MTX Amplifier?
If the bass is weak with your MTX Amplifier, it could be due to a couple of reasons. Check to ensure that your speakers are wired with the correct phase. Also, consider using MTX subwoofers to enhance the bass response.
Why is my MTX Amplifier blowing fuses?
If your MTX Amplifier is blowing fuses, it could be due to a couple of reasons. First, check if you're pushing the amplifier too hard with excessive volume levels; if so, simply lower the volume. If the issue persists, there may be a defect with the amplifier itself, and you should consider returning it for service.
How to fix distorted output on MTX Thunder Sports Amplifier?
If the output from your MTX Amplifier sounds distorted, there are a couple of things to check. First, the volume on your head unit might be set too high, so try lowering it. Also, the amplifier gain might be set too high; in that case, reduce the amplifier gain.
What to do if balance is reversed on MTX Thunder Sports?
If the balance is reversed on your MTX Amplifier, the issue likely stems from incorrect wiring. Check that your speaker wires (left and right) are correctly oriented. If not, correct the speaker wire orientation. Also, verify that the RCA inputs aren't reversed; if they are, reverse them to restore the correct balance.
Details on connecting power, ground, remote turn-on, speakers, and RCA inputs.
Instructions for connecting the +12V power cable and securing the ground connection.
Guidance on connecting RCA signal cables, remote turn-on wire, and speaker wires.
Verification steps and initial gain setting before powering on the amplifier.
Provides common problems, their causes, and solutions for amplifier operation.
To Next Page
General