MTX THUNDER SERIES - Specifications

MTX.COM
4
SPECIFICATIONS
T625CW
Speaker Type: 2-Way In-Wall / In-Ceiling
Tweeter: Pivoting 1" Teteron
Woofer: 6.5" Kevlar with Rubber Surround
Impedance: 6Ω
Sensitivity: 88dB (2.83V/1M)
Frequency Adjustments: 0 and -3dB
Frequency Response: 35Hz - 30kHz (-10dB)
RMS Power: 100-Watts
Dimensions: 8.74" x 8.74" x 3.66"
(222mm x 222mm x 93mm)
Mounting Depth: 3.44" (87.5mm)
Cut Out: 7.87" (200mm)
T625ACW
Speaker Type: 2-Way Angled In-Wall / In-Ceiling
Tweeter: Pivoting 1" Teteron
Woofer: 6.5" Kevlar with Rubber Surround
Impedance: 6Ω
Sensitivity: 88dB (2.83V/1M)
Frequency Adjustments: 0 and -3dB
Frequency Response: 35Hz - 30kHz (-10dB)
RMS Power: 100-Watts
Dimensions: 10.26" x 10.26" x 5"
(260.5mm x 260.5mm x 127mm)
Mounting Depth: 4.80" (122mm)
Cut Out: 9.41" (239mm)
T825CW
Speaker Type: 2-Way In-Wall / In-Ceiling
Tweeter: Pivoting 1" Teteron
Woofer: 8" Kevlar with Rubber Surround
Impedance: 6Ω
Sensitivity: 89dB (2.83V/1M)
Frequency Adjustments: 0 and -3dB
Frequency Response: 31Hz - 30kHz (-10dB)
RMS Power: 125-Watts
Dimensions: 10.26" x 10.26" x 3.90"
(260.5mm x 260.5mm x 99mm)
Mounting Depth: 3.70" (94mm)
Cut Out: 9.41" (239mm)
T265LCR
Speaker Type: Dual 6.5" LCR
Tweeter: 1" Teteron
Woofer: 6.5" Kevlar with Rubber Surround
Impedance: 6Ω
Sensitivity: 88dB (2.83V/1M)
Frequency Adjustments: 0 and -3dB
Frequency Response: 27Hz - 30kHz (-10dB)
RMS Power: 150-Watts
Dimensions: 15.20" x 9.45" x 3.43"
(386mm x 240mm x 87mm)
Mounting Depth: 3.23" (82mm)
Cut Out: 14.25" x 8.54" (362mm x 217mm)
© 2015 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek Corporation. Designed and
Engineered in the U.S.A.
Due to continual product development, all specications are subject to change without notice.
MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689
MTX005291 RevA 10/15 • 21A10475 • AW0015221