BEFORE THE FIRST USE:
Check that all accessories are there, and the unit is not damaged. IMPORT-
ANT: make sure to perform these steps before brewing your coffee for the
first time!
Insert the Funnel, and Permanent filter, then place Carafe onto the Warming
plate. Fill water into the water tank to the MAX level and brew water several
times without coffee powder, then discard the water. Clean and dry all
detachable parts thoroughly according to the section “CLEANING AND
MAINTENANCE”.
HOW TO MAKE COFFEE:
1. Lift and open the Top lid. Fill the Water tank
with water.
2. Insert the Funnel into the front section of the
unit, ensuring the open tab is aligned at the
front edge of a coffee maker, and that the left
and right tabs sit firmly at the sides.
3. Insert Permanent filter into the funnel. Add
coffee powder into the Permanent filter, gently
shake the filter to distribute the coffee evenly,
then close the Top lid.
NOTE: The water level should not exceed the
MAX level, as indicated on the water gauge.
The water tank capacity is 12 cups (1,800 ml).
NOTE: For best results, always use cold, fresh
water.
NOTE: Please refer to the illustration on how to
place the funnel properly.
USING YOUR 12-CUP COFFEE MAKER
To Next Page
Loading...
