Mueller Mi.Net - Configurations

4
MI.NET® MOBILE TRANSCEIVER
Congurations
4. In the EZMobile software, click
on the Mi.Net Mobile Transceiver
button in the System tab and
You will need to determine the
transceiver’s COM port and then
identify the port in the EZMobile
software.
Before you begin
1. Connect the Mi.Net Mobile
Transceiver to a power source
2. Ensure your laptop is connected
to the internet the rst time
the transceiver is set up so
the appropriate drivers can be
downloaded from the web.
3. Ensure you have the latest
Windows Updates. For Windows 7
Pro: Select the Start button, then
select Control Panel. On the All
Control Panel Items window, click
Windows Update. Look for a green
checkmark indicating updates are
current (C.). If Windows Updates
are not current, click Change
Settings. Consult your administrator
about proceeding with updates to
your computer.
Configuring COM Port
Provided Windows Updates are
current, when you initially connect
the Mi.Net Mobile Transceiver to
the laptop, drivers are automatically
installed from the Windows internet
site. This may take a few moments.
1. Using the provided USB cable,
connect the Mi.Net M Transceiver
to the laptop computer. The
computer indicates that Driver
Software Installation is in progress.
2. To open Windows Device
Manager, click the Windows Start
button and type “device manager”
in the Search programs and les
eld. In the results pane, click
Device Manager.
Alternatively, click Control Panel,
then Device Manager (D.).
3. After the drivers have installed,
the device named “USB Serial Port
(COMx)” will appear in the Ports
(COM & LPT) section (E.).
specify the correct COM Port (the
other settings are defaulted to the
correct settings).
5. Click Save.
C.
D.
COM PORT CONFIGURATION
E.