To Next PageTo Next Page
Need help?Do you have a question about the Mueller Mi.Net and is the answer not in the manual?
General| Brand | Mueller |
|---|---|
| Model | Mi.Net |
| Category | Data Loggers |
| Language | English |
Description of the collector system's components and capabilities, including the remote amplifier.
Detailed explanations of each of the 10 modules within the base unit collector.
Important safety precautions regarding electrical hazards and outdoor installation.
Guidance on various methods for securely mounting the collector base unit.
Step-by-step instructions for installing the backup battery into the collector.
Instructions for installing the remote amplifier and antenna assembly.
Information on using external antennas for cellular and GPS functions.
Recommendations for protecting the system from lightning strikes and proper grounding.
Procedures for connecting the collector to AC or solar power sources.
Instructions for attaching the ferrite filter to the power wires.
A checklist of pre-installation and post-installation tasks.
Explanation of the gateway module's LED indicators for status and faults.
Operating instructions for the BAND-IT C00169 Hand Tool used for banding.
Recommendations for surge protection on AC service boxes in high lightning areas.
Guidance on proper grounding techniques for diverting lightning strike energy.
Best practices for wire sizing, grounding rods, and bus bar connections.
Important notes regarding qualified personnel and solar array specifications.
Wiring the solar array's Remote Sensor Module (RSM) to the gateway.
Definitions for solar voltage warning and critical alarm conditions.
Connecting RSM to MNC for battery alarm signal transfer.
List of field-replaceable modules with part numbers and descriptions.
Interpreting gateway LEDs for fault diagnosis and troubleshooting.
Troubleshooting steps for power supply and circuit breaker issues.
Definitions and troubleshooting sections related to gateway LED indicators.
Troubleshooting steps for Antenna SWR, Gateway SWR, and backhaul errors.
Troubleshooting steps for GPS errors, tamper faults, and temperature issues.
Technical specifications for the Mi.Net collector base unit, including voltage, dimensions, and ratings.
Technical specifications for the remote amplifier, antennas, and other components.
Explanation of hazard symbols and labels used on the collector unit products.
Contact information and support resources for Mueller Systems.
