To remove the Lid:
Hold the Handle firmly and turn the Lid
counterclockwise to remove it.
To attach the Lid:
Insert Lid by positioning the Spout cover
tab at 90° to the right of the Spout. Rotate
clockwise (270°) until the Spout cover tab is
aligned with the Spout. The Lid should lock
into place and be airtight.
To remove/attach the Handle:
Hold the Carafe firmly with one hand, then
remove the Handle and the Lid by turning
the handle counterclockwise. To attach –
turn the handle clockwise until firmly
secured.
To remove/attach the Mesh filter:
Detach the Mesh filter from the Handle by
turning it counterclockwise.
To attach, align the tabs at the top of the
Mesh filter with the open slots of the handle,
then turn clockwise to lock in place.
ASSEMBLE/DISASSEMBLE:
To Next Page
Loading...
