32
Camera Setting
Use this feature to set up your preferred options.
1. Tap icon [Camera Setting] on main screen. The
camera will stop recording.
2. See available settings below and adjust to your preferred
options.
Vibration
Detection to
Power On/Off
When pick up the helmet with
camera mounted, the camera
will automatically power on
and start recording. If the
helmet idles for 3 minutes, the
camera will power off
automatically.
*The camera must be mounted
with the mount.
Enable/Disable audio
recording.
Set the length of each
individual recording.
Calibrate the Tilt-Sensor for
topple-over detection.
Enable/Disable emergency
recording function.
*The emergency recording
folder is occupied 20% of
memory card. Even it turns off,
this capacity is still occupied.
To Next Page
Loading...
