Need help?Do you have a question about the Muirhead 9252 and is the answer not in the manual?
General| Brand | Muirhead |
|---|---|
| Model | 9252 |
| Category | Controller |
| Language | English |
Guidelines for ensuring personal safety during operation and maintenance.
Procedures for safe operation and maintenance of the machine.
Instructions for safe handling and use of the product.
Details the in-cabin mounted device and its key features.
Explains the function and configuration of various inputs.
Details the function and configuration of various outputs.
Explains the meaning of each LED indicator light.
Lists and describes available software configuration options.
Details the pin assignments and signal descriptions for connections.
Illustrates the external wiring for a single bank lubrication system.
Illustrates the external wiring for a dual bank lubrication system.
Shows the external wiring for the basic programming adaptor lead.
Details the loom configuration for the in-line programming adaptor.
Describes the software used for setup and advanced configuration.
Explains the layout and functions of the software's home screen.
Guide on simulating a lube controller for testing and adjustment.
Instructions on connecting the device using COM ports.
Process for updating the device's firmware.
Overview of the layout and sections of the main setup screen.
How to switch between connected or simulated devices.
Explains the functions of the toolbar buttons.
How to configure and set up the unit's inputs.
Describes settings like Input mode, Pull-up mode, Active, Enabled, Voltage.
Explains how to configure various device options.
Details fields for recording device setup and installation information.
Explains diagnostic counters for tracking events.
Describes timer settings and device function specifics.
Provides detailed descriptions of each timer's function.
Details how to configure the unit's outputs.
Describes the on-board indicators and audible alarm.
Covers indicator brightness, lamp test, and sonalert level.
Procedures for testing a physical unit and running simulations.
Default settings for lubrication configuration.
Default values for various timer settings.
Default settings for alarm configurations.
Default values for advanced system settings.
Manufacturer's recommendations for scheduled servicing.
Step-by-step guide for performing maintenance.
To Next Page