M0588.docx | Rev 1.5 | Modified on 12/11/2018 | © Remote Control Technologies Pty Ltd
Contents
General Safety Warnings 6
Personal Safety 6
Machine 6
Product 6
Product Overview 7
Features and Functions 7
Operation and Use 8
Control Unit 8
Inputs 8
Outputs 9
LED Indication 9
Software Options 9
Installation Guide 10
Wiring Connections 10
Wiring Connections for part number 4606 and 3560 10
Wiring Diagrams 11
− Single Bank System – External Wiring Diagram (427i) 11
− Dual Bank System – External Wiring Diagram (427h) 12
− Basic Programming Adaptor Lead – External Wiring Diagram (427j) 13
− In-Line Programming Adaptor Lead – Loom Configuration (423a) 14
Calibration 15
Software Detailed Description and Advanced Configuration 15
Home Screen 15
− Simulating a Lube Controller 15
− Connecting via COM Port 16
− Upgrading the Device 16
Main Setup Screen 16
− Layout 16
Section 1 – Tabbed Browsing of Devices 17
Section 2 – Toolbar Buttons 17
Section 3 – Inputs Section 18
Section 4 – System State 20
Section 5 – Outputs/Indicators 22
Testing and Simulation 23
− Testing a Physical Lube Controller 23
− Running a Simulation 23
Factory Default Settings 24
− Lubrication Options 24
− Timer Settings 24
− Alarm Options 24
− Advanced Settings 24
Service Information 24
Service Schedule 24
Service Procedure 24
Parts List 25
Technical Specifications 25
To Next Page