Muller Elektronik Joystick III - Fitting a joystick with a CPC connector; Fitting a joystick with a CPC connector and a CPC socket

2
Assembly instructions
Fitting a joystick with a CPC connector
6
3032258305-02-EN
Fitting a joystick with a CPC connector
Angle brackets
For attachment in the cabin
Connector for connection to the
vehicle's ISOBUS In-Cab-
Connector
You fit the joystick as follows:
1. Fit the joystick next to the driver on the right.
2. Plug the connector into the ISOBUS in-cab-connector of your vehicle.
⇨ The joystick is now connected to your vehicle.
⇨ When the vehicle is switched on, the LED on the joystick lights up.
Fitting a joystick with a CPC connector and a CPC socket
Angle brackets
For attachment in the cabin
Socket for connection to the CPC-
Sub-D adapter cable.
Connector for connection to the
vehicle's ISOBUS In-Cab-
Connector
You fit the joystick as follows:
1. Fit the joystick next to the driver on the right.
2.2
Procedure
2.3
Procedure