Need help?Do you have a question about the multicomp pro MP Dual Channel Series and is the answer not in the manual?
General| Brand | multicomp pro |
|---|---|
| Model | MP Dual Channel Series |
| Category | Test Equipment |
| Language | English |
Defines terms like Warning, Caution, Danger used in the manual and on the product.
Lists and explains safety symbols found on the product and their meanings.
Outlines essential precautions to prevent personal injury and product damage.
Instructions for checking for damage sustained during shipping and handling.
Guide to confirm all supplied accessories are present and undamaged.
Steps to ensure the instrument is undamaged and functions correctly upon receipt.
Detailed description of the oscilloscope's physical layout and front panel controls.
How to adjust the vertical placement of the waveform on the display.
How to set the vertical scale (volts per division) for measurements.
Settings for waveform data capture mode and the number of recorded points.
Options to enable XY display mode and adjust the screen refresh speed.
Procedure to center the trigger point horizontally on the waveform display.
Using the device to automatically measure key waveform parameters.
Using cursors for manual measurement of waveform characteristics.
Selecting trigger signal source, coupling method, and trigger mode.
Configuring edge-based triggers and their horizontal position.
Using force trigger and setting the trigger voltage level.
Procedures for saving and loading oscilloscope configuration parameters.
Storing and comparing current waveforms against a saved reference.
Instructions for saving captured waveforms in various file formats.
Procedures for saving the current screen display as an image file.
Adjusting screen brightness, backlight, and menu display duration.
Configuring language, shutdown, buzzer, and USB connection modes.
Overview of the multimeter's functions, input terminals, and display.
Connecting the generator and configuring waveform parameters.
Resolving issues where the oscilloscope fails to turn on or stays on.
Diagnosing and correcting incorrect measurement type displays in multimeter mode.
Addressing issues with voltage amplitude readings being significantly off.
Troubleshooting methods for waveforms that are not stable on the screen.
Resolving cases where no waveform appears after activating RUN/STOP.
Specifications for bandwidth, sampling methods, and rates.
Details on input impedance, probe attenuation, and horizontal system.
Specifications for sensitivity, analog bandwidth, and low-frequency response.
Details on cursor measurements, automatic measurements, and trigger system.
Specifications for DC/AC voltage and current, resistance, and capacitance.
Specifications for waveform frequency, sampling rate, and amplitude.
Details on vertical resolution, waveform depth, and output impedance.
Details on display type, resolution, power supply, and consumption.
Operating conditions, temperature, humidity, dimensions, and weight.
A comprehensive list of items supplied with the oscilloscope and multimeter.
Recommended practices for maintaining the instrument's condition.
Specific instructions for safely cleaning the instrument's exterior and LCD.
Information and methods for charging the device's lithium battery.
Instructions and precautions for replacing the lithium battery.
To Next Page
