Do you have a question about the multicomp pro MP720105 and is the answer not in the manual?
Category | Test Equipment |
---|---|
Model | MP720105 |
Type | Digital Multimeter |
Display Type | LCD |
Display Digits | 3.5 |
Temperature Measuring Range | -20°C to 1000°C |
Sensor Type | Thermocouple |
Functions | Voltage, Current, Resistance, Capacitance, Frequency, Temperature |
Power Source | 9V Battery |
Safety Rating | CAT III 600V |
Battery Type | 6F22 |
Current Range (AC) | 200µA to 10A |
Current Range (DC) | 200µA to 10A |
Resolution | 0.1 |
Accuracy | ±1.0% |
Defines warning terms and safety symbols used in the manual.
Overview of front panel, menu buttons, rear panel, and control area.
Explains UI, gestures, zoom modes, and touchscreen controls.
Covers inspections, probe compensation, self-calibration, and system overviews.
Setting vertical/horizontal systems, trigger types, and decoding.
Using math functions, filters, FFT, and cursors for analysis.
Saving, recalling, cloning waveforms, and screen printing.
Connecting output ports and configuring generator channels.
Setting parameters for sine, square, ramp, pulse, and arbitrary signals.
Performing FRA measurements and interpreting Bode charts.
Navigating the DMM menu and performing various electrical measurements.
Using data hold, relative measurements, information display, and recording functions.
Connecting and communicating with a PC via USB, LAN, and Wi-Fi.
Connecting and communicating with Android devices via Wi-Fi.
Demonstrates simple signal display, auto measurement, and noise analysis.
Examples for capturing signals, X-Y function, and video triggering.
Solutions for no display, waveform acquisition, and stability problems.
Addressing trigger response, slow display, and other operational issues.
Detailed specifications for bandwidth, resolution, acquisition, and input.
Specs for horizontal/vertical systems, trigger types, and waveform generator.
Lists accessories, provides care guidelines, and battery usage info.