Need help?Do you have a question about the multicomp pro MP700005 and is the answer not in the manual?
General| DMM Type | Handheld |
|---|---|
| Current DC Max | 10A |
| Current AC Max | 10A |
| Resistance Max | 40MΩ |
| Frequency Max | 10MHz |
| Display Count | 4000 |
| Model | MP700005 |
| Type | Digital Multimeter |
| Display | LCD |
| Battery Type | 9V |
| Functions | Voltage, Current, Resistance, Capacitance, Frequency, Temperature |
| Safety Category | CAT III 600V |
| Category | Digital Multimeter |
| Current Range (AC) | 10A |
| Current Range (DC) | 10A |
| Resistance Range | 40MΩ |
| Frequency Range | 10MHz |
Lists items included with the calibration meter.
Identifies and describes the main parts and indicators of the calibrator.
Details how to use the calibrator in source mode for voltage and current output.
Explains how to enable, disable, and configure the automatic power off feature.
Describes how to adjust the display backlight brightness and save the setting.
Step-by-step guide for measuring voltage using the calibrator.
Step-by-step guide for measuring current using the calibrator.
Instructions for measuring loop current using the calibrator's 24V loop power.
How to set and adjust the 0% and 100% values for output functions.
Explains the auto ramping function for continuous signal variation.
Procedure to restore the calibrator to its original factory settings.
Instructions for cleaning the meter safely and effectively.
To Next Page