2
Read all instructions before using the appliance and retain for future reference.
• Please follow all safety operation instructions.
• Check the test leads, probes and case insulation before using. If you nd any
breakage or abnormality, or you consider the device is broken, stop using the
device immediately.
• Output a test voltage to conrm the calibrator is working properly before use.
• Select the proper function and range according to the measurement requirements.
• Before using the calibrator, make sure the battery cover is closed.
• When using the probes, do not touch the metal part of the probes. Keep your
ngers behind the nger guards on the probes.
• Always connect the common test lead rst then the live test lead. Remove the live
test lead rst when disconnecting.
• Disconnect the test leads before switching to other measurements or outputs.
• Do not apply <30V between any terminal and ground or between two terminals.
• Children should be supervised to ensure that they do not play with the product.
• Do not use the product for any purpose other than that for which it is designed.
• Do not operate the product around explosive gas, vapour, or dust.
• Do not operate or store in an environment of high humidity or where moisture may
enter the product as this can reduce insulation and lead to electric shock.
• Turn the meter off when not in use to save the battery.
• Remove the battery if the meter is not to be used for long periods.
• Remove the test leads on the calibrator before opening the battery cover.
• Replace the battery as soon as the low battery warning appears on the display to
avoid possible electric shock or personal injury caused by incorrect readings.
PRODUCT OVERVIEW
WHAT’S INCLUDED
• Calibration meter
• Battery.
• Instruction manual.
• Test leads.
• Alligator clip.
IMPORTANT SAFETY INFORMATION
1. Source/Measure/Loop/Sim indicator
2. Main display
3. Low battery indicator
4. Excitation current too high
5. Excitation current too low
6. Ramp/Step indicator
7. Voltage unit
8. Percentage of source/measurement
value
1
4
5
6
3
7
8
2
To Next Page
Loading...
Need help?
General
