12.Appendix
12. Appendix
Appendix A: Enclosure
(The accessories subject to model type.)
Standard Accessories:
Power Cord CD Rom
Probe Adjust
Options:
Multimeter Lead
Q9 Capacitance
Ext Module
Battery
Soft Bag
Appendix B: General Care and Cleaning
General Care
Do not store or leave the instrument where the liquid crystal display will be exposed
to direct sunlight for long periods of time.
Caution: To avoid any damage to the instrument or probe, do not exposed it to any
sprays, liquids, or solvents.
Cleaning
Inspect the instrument and probes as often as operating conditions require.
To clean the instrument exterior, perform the following steps:
148
Quick Guide USB Cable Probe
1. Wipe the dust from the instrument and probe surface with a soft cloth. Do not
make any scuffing on the transparent LCD protection screen when clean the LCD
screen.
2. Disconnect power before cleaning your Oscilloscope. Clean the instrument with a
dampened soft cloth. It is recommended to use mild detergent and fresh water.
To avoid damage to the instrument or probe, do not use any corrosive
chemical cleaning agent.
Warning: Before power on again for operation, it is required to confirm that
the instrument has already been dried completely, avoiding any
electrical short circuit or bodily injury resulting from the moisture.
To Next Page
Loading...
Need help?
General
