Need help?Do you have a question about the multicomp pro MP710087 and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| Frequency | 50/60Hz |
| Power Rating | 150W |
| Voltage Resolution | 10mV |
| Current Resolution | 1mA |
| Voltage Accuracy | ±0.5% + 2 digits |
| Current Accuracy | ±0.5% + 2 digits |
| Cooling | Fan |
| Display Type | LED |
| Output Voltage | 0-30V |
| Output Current | 0-5A |
| Connector Type | Binding posts |
| Protections | Over voltage, over current |
| Operating Temperature | 0 ~ 40°C |
| Storage Temperature | -20°C to 70°C |
Details the physical controls and display elements on the front of the power supply unit.
Verifies the basic functionality of voltage output without an external load.
Checks the current output functionality by shorting the terminals.
Instructions for activating or deactivating the output channel of the power supply.
Steps for adjusting the desired voltage and current levels for the output.
Explains how to configure and the function of OVP and OCP to protect loads.
Steps to diagnose and resolve problems when the instrument screen does not show any output.
Guidance for identifying and fixing problems related to incorrect voltage or current output.
To Next Page
