User Manual
(3) Press the
keys to show a red cursor.
(4) Press the
/
/
/
keys to move the red cursor between
parameters. Turn the rotary control to change the current cursor value,
press the
/
arrow keys to move the cursor.
Set values of voltage
Set values of current
Set values of O.
V.P
Set values of O.
C.P
4. System Settings
4.1.1 Display Brightness
Press the System softkey and turn the rotary control to highlight the System
main menu. Press the
keys to highlight the Brightness submenu. Press the
/
keys to adjust the brightness of the screen. The adjustment range is
from 1 to 100.
4.1.2 Language Setting
Press the System softkey and turn the rotary control to select the [Utility]
menu. Press the
arrow keys to choose the language. Press the
/
arrow keys to select the desired language. Supported languages include
Chinese and English.
4.1.3 Buzzer
Press the System softkey and turn the rotary control to select the [Utility]
menu. Press the
arrow keys to choose buzzer submenu. Press the
/
arrow keys to toggle the beeper on/off. When the buzzer is on, the status bar
icon
lights up. When the system prompts, it beeps, such as when the
output is cut due to overvoltage/overcurrent protection.
4.1.4 Display (Only for MP710086 and MP710087)
Press the System softkey and turn the rotary control to select the [Utility]
menu. Press the
arrow keys to choose Display submenu. Press the
/
To Next Page
Loading...
Need help?
General
