multicomp pro MP710256 US - Specifications

Page <8> V1.026/07/24
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Specications
Characteristics MP710256 US MP710257 US
Power 300W 300W
Voltage 0-30V 0-60V
Current 0-30A 0-15A
Load Regulation
Voltage ≤0.01% +3mV ≤0.01% +2mV
Current ≤0.1% +5mA ≤0.1% +5mA
Line Regulation
Voltage ≤0.01% +3mV ≤0.01% +3mV
Current ≤0.1% +3mA ≤0.1% +3mA
Setup Resolution
Voltage 1mV 1mV
Current 1mA 1mA
Read Back Resolution
Voltage 1mV 1mV
Current 1mA 1mA
Setup Accuracy (25°C ±5°C)
Voltage ≤0.5% +3mV ≤0.5% +5mV
Current ≤0.5% +5mA ≤0.5% +3mA
Voltage Rise Time
Rise Time ≤50ms ≤65ms
Fall time ≤50ms ≤50ms
Ripple (20-20M)
Voltage ≤10mVrms +0.03% of current output ≤10mVrms +0.03% of current output
Current ≤3mArms ≤3mArms
Temperature Coefficient
Voltage ≤150ppm ≤150ppm
Current ≤150ppm ≤150ppm
Read Back Temp. Coe󰀩cient
Voltage ≤150ppm ≤150ppm
Current ≤150ppm ≤150ppm
Accessories
User manual × 1, Power cord × 1, USB × 1
Weight and Dimension
3.9kg
90mm(W)×184mm(H)×337(D)
3.9kg
90mm(W)×184mm(H)×337(D)
Note: the specications below are tested under the conditions of temperature 250°C ±5°C and the warm-up for 5 minutes.