[
57
]
Continued from previous page.
4 Enter the Technician Level password. (See Note)
5 Entering the Technician Level password displays the Technician 1/4 screen.
6
Press the key to navigate to the Digital I/O screen.
7
Press the key to enter the Product Sensor menu options.
8
Press the
MENU
key 3 times to navigate to the Advanced Product Sensor setting.
Note - The password is disclosed during the install and training or available by contacting the
Multifeeder Technology service department at (651) 407-3100 during normal business hours in
the central time zone.
Terms/Conditions
Maintenance
SafetyIntroduction Terminology Setup
To Next Page