[
6
]
Below is a description of the sections contained in the manual. You may also navigate to a specic
section in the electronic version of this manual by clicking on one of the section tabs above.
Safety - The Safety section outlines the general safety precautions you should use when operating
your MFT equipment.
Terminology - The Terminology section describes the main components of your MFT equipment and
introduces you to terminology used later in the manual.
Setup - The Setup section provides instructions for basis setup the MFT equipment.
Maintenance - The Maintenance section describes the basic maintenance necessary to ensure
optimal performance of your MFT equipment.
Terms and Conditions - Multifeeder Standard Terms and Conditions.
Icon Definitions
Caution - This icon is used to alert you to very important safety instructions.
Tip - This icon is used to alert you to helpful information or operational tips.
Important - This icon is used to alert you to important information.
Introduction
Terms/ConditionsSetup
Maintenance
TerminologySafetyIntroduction
To Next Page
Loading...