Multifeeder MFT 102hsm - Page 67

[
67
]
Continued from previous page.
The following instructions guide you through navigating and entering the No Product Sensor
Value determined from the previous page.
10
From the READY screen on the controller, press the
MENU
key.
11
Press the key to navigate to the Main 2/2 screen.
12
Enter the Technician Level password. (See Note) Press the key.
13 Entering the Technician Level password displays the Technician 1/4 screen.
14
Press the key to navigate to the Digital I/O screen.
Continue on the next page.
Note - The password is disclosed during the install and training or available by contacting the
Multifeeder Technology service department at (651) 407-3100 during normal business hours in
the central time zone.
Terms/Conditions
Maintenance
SafetyIntroduction Terminology Setup