11
Parts list for the Big Lift II
Part No. Description Material Dimensions / notes
No. off
Primary components:
1 1 Building instructions Paper Printed
2 1 Decal set Film Printed
3 1 Fuselage Balsa / plywood Ready made
4 1 L.H. inboard wing panel Balsa Ready made
5 1 R.H. inboard wing panel Balsa Ready made
6 1 L.H. outboard wing panel Balsa Ready made
7 1 R.H. outboard wing panel Balsa Ready made
8 2 Aileron Balsa Ready made
9 2 Landing flap Balsa Ready made
10 2 Fin Balsa Ready made
11 1 Fin strake Balsa Ready made
12 1 Rudder Balsa Ready made
13 1 Tailplane Balsa / styrofoam Ready made
14 2 Elevator Balsa Ready made
15 2 Wingtip Balsa Ready made
16 1 Main undercarriage unit Aluminium Ready made
17 1 Windscreen White ABS Vac. moulded
18 1 Cowl White GRP Ready made
19 1 Snake support Balsa 10 x 10 x 141 mm
20 2 Central snake support Balsa 10 x 10 x 104 mm
Assembling the fuselage and wings:
30 2 Reinforcing rib Plywood Machined
31 1 Large hatch plate Balsa 5 x 220 x 142 mm
32 1 Small hatch plate Balsa 5 x 70 x 142 mm
33 8 Wing-mounted servo plate Plywood 3 x 55 x 47 mm
34 2 Facing rib Plywood 1.5 x 45 x 335 mm
35 1 Cabin latch spacer Plywood 2 x 20 x 120 mm
36 1 Fuselage servo plate Plywood 5 x 120 x 142 mm
37 1 Wing strut support Plywood 10 x 10 x 150 mm
38 6 Aileron / flap hinge reinforcement Balsa 10 x 10 x 30 mm
39 2 Strut support capstrip Balsa 2 x 12 x 85 mm
40 4 Servo support strip (triangular section) Spruce 15 x 15 x 120 mm
41 2 Aero-tow servo support strip Obechi / spruce 8 x 10 x 142 mm
42 2 Dihedral brace Aircraft plywood 3 x 37 x 190 mm
Wing strut system:
50 2 M5 coupling and retainer Aluminium Ready made
51 2 M5 coupling adaptor Aluminium Ready made
52 2 Coupling with 6 mm Ø hole, S-clip Aluminium Ready made
53 2 Wing-mounted strut bracket Steel Ready made
54 2 M5 nut Steel Standard part
55 2 Fuselage strut bracket Steel / aluminium 2 x 16 x 190 mm
56 2 Wing strut CFRP / GRP 6 Ø x 700 mm
57 4 Wing strut fairing Profiled wood 660 mm long
58 8 Woodscrews (wing struts, tailwheel unit) Steel 3.5 Ø x 30 mm
Small items:
60 1 Tailwheel unit, complete set Steel Ready made
61 3 Main undercarriage retaining screw Steel M6 x 30 mm
62 47 Screw for flap hinges, horns, cowl Steel 2.5 x 20 mm
63 7 Clevis locknut Metal M2.5 x 1.5 mm
64 2 Locating pin guide Brass 5/4 x 158 mm
65 7 Control surface horn Plastic 18 mm
66 4 Threaded rod Steel M2.5 x 70 mm
67 7 Clevis Steel M2.5
68 6 Threaded coupler Metal M2.5
69 1 Cabin latch Aluminium Ready made
70 11 Aileron horn woodscrew Steel 2.5 x 25 mm
71 8 Large-head self-tapping screw Steel 2.2 x 6.6 mm
72 3 Captive nut Steel M6
73 13 Hinge Plastic Ready made
74 2 pr. Aileron / flap servo well cover ABS Vac. moulded
75 6 Offset flap hinge Plastic Ready made
76 3 Snake outer sleeve Plastic 3/2 Ø x 850 mm
77 3 Steel pushrod Steel 1.4 Ø x 1000 mm
78 4 Locating peg Steel 4 Ø x 60 mm
79 2 Wing retainer hook Steel 3 Ø x 90 mm
80 1 Aero-tow release guide tube Brass 2/3 Ø x 30 mm
81 1 Aero-tow release bracket Aluminium 14/40 x 10 mm
82 1 Rod for aero-tow release Steel 1.3 Ø x 120 mm
To Next Page
Loading...
