Need help?Do you have a question about the Multiplex Alpina magic and is the answer not in the manual?
Steps for assembling the main body, including cabin frame and internal components.
Installing a strut for structural integrity during landings.
Fitting and securing the model aircraft's canopy.
Instructions for installing an aero-tow coupling system.
Detailed steps for assembling the horizontal tail surfaces.
Instructions for constructing and fitting the vertical tail surface.
Steps for preparing and assembling the main wing panels.
Installing the mechanism for controlling ailerons.
Guidance on mounting servos within the wing structure.
Attaching wingtips and extensions for performance tuning.
Instructions for installing and setting up the airbrake system.
Gluing the wing joiner blades into the wing panels.
Installing ribs at the wing root for structural support.
Mounting the towhook for aero-tow operations.
Fitting ballast tubes for flight tuning.
Applying paint or decals to the fuselage.
Applying film covering to the wing surfaces.
Instructions for applying decorative transfers to the model.
Connecting servos, receiver, and battery.
Adjusting the center of gravity for optimal flight.
Guidelines for initial flights and trim adjustments.
Fitting extensions to modify wing area and flight characteristics.
To Next Page
General