EasyManua.ls Logo

Multiplex Blend-In-Cup Machine Welbilt KitchenCare MA-8-2 - Page 10

Multiplex Blend-In-Cup Machine Welbilt KitchenCare MA-8-2
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Once the 35 psi dynamic setting has been achieved
push the knob back to the downward position and
turn off the water solenoid and/or the product
solenoid.
41. Return and secure the upper left side panel.
42. Return and secure the upper rear panel.
43. Point out the service label to the manager and
inform him or her that all service requests need
to be placed by calling the number on the label.
The service label should be adhered to inside or
outside of the right side cup holder.
44. Retrieve the product from the walk in cooler
and return it to the assigned slot position within
the BIC unit.
NOTE: Verify flavor slot assignments are in
accordance with McDonald’s corporate. If the
product assignments are not in accordance they
must be reassigned.
Strawberry
Banana
Mocha
Caramel
Not
Assigned
Slushy
Seasonal
Mango
Pineapple
Yogurt
If reassignment is required follow the next steps
from the easyToUCH screen;
Select the Manager Menu Icon
Select "A" for the password
Select the green check
Select the Configure Slots Icon
Select Slot Flavor
Select the slot requiring reassignment
Select Unassign Flavor and then select
the Green Check
Select the newly Unassigned Slot and
select the correct flavor assignment
Select the Return Arrow three (3) times
to return to the main easyToUCH screen
Select product Inventory Icon
Select the reassigned flavor and follow
the steps for replacing a product bag.
NOTE: Be sure to prime enough product so that no
air is present in the line.
Follow the same procedures for each
reassigned product.
45. Fill the ice bin with ice.
46. Allow cabinet and nozzle temperatures to drop
below 40°F. Cabinet temperature will need to be
40°F or below before beginning Step 47.
47. Perform a calibration following the next steps
from the easyToUCH screen;
Select the Manager Menu Icon
Select "A" for the password
Select the green check
Select CONFIGURE SLOTS
Select CALIBRATE FLAVOR
Select flavor in slot 1 and follow the on
screen calibration instructions.
Continue calibrating each flavor, water,
and ice.
Multiplex
2100 Future Drive
Sellersburg, IN 47172
Phone: 844-724-2273
Fax: 920-683-7592
Page 10 of 13
2020 Tune Up, continued

Related product manuals