Multiplex Blend-In-Cup Machine Welbilt KitchenCare MA-8-2 - Page 11

48. Follow the next steps from the easyToUCH
screen to reset the LAST MAINTENANCE DATE;
• Select the MANAGERS MENU
• Select "A" for the password
• Select the green check
• Select the Down Arrow and select
SERVICE
• Select "A" for the password
• Select the green check
• Arrow down and select PLANNED
MAINTENANCE
• Select MIXER MAINTENANCE
PERFORMED
• Type SILENCE
• Select the green check
• Confirm screen displays "Confirmation
Blender(s) Maintenance Done"
• Select the green check
• Arrow back three (3) times
49. From the easyToUCH screen select the
MANAGERS MENU;
• Select "A" for the password
• Select the green check
• Arrow down two (2) times
• Note the UI Version
• Note the SRB Version
• Note the Left and Right Mixer Version
• Note the File
• Note the Menu Connect version
50. From the easy Touch screen select the Manager
Menu Icon;
• Select "A" for the password
• Select the green check
• Arrow down three (3) times
• Under the DRINKS SINCE INSTALLATION
heading note the Left Mixer count, Total
Count, and Right Mixer Count.
51. Confirm the “CONFIGURE YOGURT SMALL
DISPENSE” is set to zero (0) from the easyToUCH
screen;
• Select the Managers Menu
• Select "A" for the password
• Select the green check
• Arrow down one (1) time
• Select SERVICE
• Select "A" for the password
• Select the green check
• Arrow down two (2) times
• Select CONFIGURE YOGURT SMALL
DISPENSE
• Confirm SLOT NUMBER is zero (0).
• If SLOT NUMBER is not zero (0), select
the box to the left> Enter 0> Select the
green check> Arrow back twice> and
Save if prompted.
52. Confirm “PLUNGE SPEED” is set at 15 and “CUP
OFFSET” is set at 2.0 from the easyToUCH screen;
• Select the Managers menu
• Select "A" for the password
• Select the green check
• Arrow down once
• Select SERVICE
• Select "A" for the password
• Select the green check
• Select Options
• Arrow down twice
• Confirm the box to the left of PLUNGE
SPEED is set to fifteen (15), select box
and enter 15 if required> Select the
green check to confirm>
• Confirm the box to the left of CUP
OFFSET is set to 2.0, if required select the
box and enter two (2), zero (0), this will
change the setting to 2.0
• Select the green check
• Arrow back three (3) times
• Select Save when prompted
53. With the manager present make sample drinks
of each size.
54. Confirm operation of all functions.
55. Provide the removed parts to the manager.
Multiplex
2100 Future Drive
Sellersburg, IN 47172
Phone: 844-724-2273
Fax: 920-683-7592
Page 11 of 13
2020 Tune Up, continued