3
MULTIPLEX receivers from RX-7-DR light M-LINK Order no. 5 5810
or RX-7 M-LINK (telemetry-capable) Order no. 5 5818
When using telemetry-capable M-LINK receivers, you can t the model for instance with the Vario/height sensor, current sensor (electronic fuel gauge)
or the G-sensor. A wide range of other sensors are available.
ServoSet with cable set
M6/UNI (complete)
6x servo HS-65HB Carbonite
1x cable set M6/UNI (for wing servos)
2x servo extension cable 60 cm (for fuselage servos)
2x plug fuse UNI
Order no. 1 -00113
Drive set “FunRay” Brushless motor ROXXY C35-48-990kv, with xing screws
Controller ROXXY BL Control 755 S-BEC
Flap propeller 11x7“ (pair)
Driver, spinner, and accessories are already included in the kit!
Order no. 1 -00103
Alternative
(available individually)
6x servo HS-65HB Carbonite (elevator+rudder+2x aileron+2x ap) Order no. 11 2065
1x cable set M6/UNI FunRay (complete) Order no. 1 -00112
2x servo extension cable 60 cm (for fuselage servos) Order no. 8 5032
1x plug fuse UNI (SU 5 pcs.) Order no. 1 -00137
Controller ROXXY Smart Control 70 MSB (with telemetry) Order no. 31 8579
Battery recommendation LiPo battery ROXXY EVO LiPo 3 - 3200M 30C (with M6 plug) ~265g Order no. 1 -00482
Adhesive Zacki ELAPOR ® 20g Order no. 59 2727
Zacki ELAPOR® Super Liquid 10g Order no. 59 2728
Hot glue, contact adhesive for canopy
Charger HITEC multi charger X1 NANO Order no. 30 8561
POWER PEAK B6 EQ-BID Order no. 11 4132
Tools Cutter
Side cutter
Screwdriver (for M3)
Socket wrench WAF 13
Hot glue gun
Wingspan 2000 mm
Overall length 1230 mm
Flying weight electric 1790 g
Wing area
(WA)
40 dm²
(wing and elevator unit, without fuselage)
Wing loading 45 g/dm²
RC functions
Elevator, rudder, aileron, camber-changing flaps (flaps) => (butterfly), engine control or aero-tow release
The center of gravity is 75 mm away from the front edge of the wing (hemispheres on the bottom).
Specications
Remote control elements in the model / other accessories / recommended equipment:
To Next Page
Loading...
Need help?
General