MULTIQUIP MTX SERIES - INSPECTION PROCEDURE; ENGINE AND OIL

5.2 Operating test
5.1 External appearance check
5. INSPECTION PROCEDURE
5
Installation of parts (loosened screw, defective parts, etc.)
Damage on machine
Oil check (level and contamination)
A. Engine oil (SAE10W-30 when shipped) (See operation manual for the engine)
B. Main body oil (SAE10W-30 when shipped) (See table 1)
Shock rubber for damage, crack, fatigue, hardening, etc.
Check for engine speed. (Idling and Operating speed)
Check for abnormal noise and jump during operation.
(1)
(2)
(3)
(4)
(1)
(2)
6. ENGINE AND OIL
Model
Engine type
Idling engine speed
Setting speed
Fuel tank capaity
Lubricant for Body
Capacity of Lubricant
for Body
Lubricant for Engine
Capacity of Lubricant
for Engine
Fuel
MTX-70
1900 - 2000
3800 - 4100
MTX-60
1900 - 2000
3800 - 4100
2 (2.1)
Honda
GX100U-KRBF
0.65 (0.69)
0.28 (0.30)
rpm
rpm
liters
(quart)
liters
(quart)
liters
(quart)
MTX-80
1900 - 2000
3400 - 3600
3 (3.2)
Automobile Oil SAE 10W-30; Class SE or higher
Automobile Oil SAE 10W-30; Class SE or higher
Unleaded Gasoline
MTX-90
1900 - 2000
3500 - 3700
Robin
EH12-2D46530
0.82 (0.87)
0.4 (0.42)
Table 1