Why won’t my Multistack Chiller load at 100% demand?
If your Multistack chiller won’t load at 100% demand, turn the chiller on, check the sensors and check the load limit setting in the system variables.
What to do if my Multistack Chiller shows 'EX 1,2, Interlock'?
If your Multistack chiller is showing an 'EX 1,2, Interlock' error, check the appropriate interlock component and check the jumpers on TB11 in the master control.
How to fix a Multistack MS070XC Chiller with no display on the master module?
To troubleshoot a Multistack chiller with no display on the master module: * Check the main disconnect for power. * Check the circuit breakers in the module. * Check the transformer in the modules. * Check for 24V at J1 on the board.
Details the master control panel and its functions.
Describes compressors, sensors, and switches used in the modules.
Details the sequence of operation for leaving chilled water temp control.
Guidelines for preventative maintenance tasks.
General| Brand | Multistack |
|---|---|
| Model | MS070XC |
| Category | Chiller |
| Language | English |
To Next Page
