Need help?Do you have a question about the Multitech MTCAP-LEU1-868-001L and is the answer not in the manual?
General| Brand | Multitech |
|---|---|
| Model | MTCAP-LEU1-868-001L |
| Category | Wireless Access Point |
| Language | English |
Connects IoT assets to the cloud using LoRaWAN protocol, expanding network coverage and forwarding user data.
Details general, radio frequency, physical, environment, power, and compliance specifications for the MTCAP.
Lists transmission output power levels for various bands and technologies supported by the LE910 modem.
Specifies the LoRa transmission output power in dBm for 868 MHz models, including measurements at different times.
Warns about using the correct power supply to avoid damaging the device and voiding the warranty.
Provides general safety guidelines for device usage, including placement and avoiding hazardous environments.
Provides safety advice regarding RF interference, restrictions in specific environments, and device usage in aircraft or vehicles.
Discusses how RF energy can interfere with medical devices like pacemakers and provides precautions.
Offers simple precautions for pacemaker wearers to minimize potential interference from cellular devices.
Provides step-by-step instructions for inserting a micro SIM card into the MTCAP device.
Details how to connect to the MTCAP via SSH, including IP configuration and default credentials.
Explains how to configure static IP, DHCP, and internet access settings via the Ethernet interface.
Guides on establishing a cellular data link by setting up APN and initiating a PPP connection.
Provides steps to configure the LoRaWAN network server settings for 868 MHz EU models.
Instructions for accessing the AEP web interface, including default login credentials and initial setup wizard.
Confirms the device's compliance with EU directives regarding EMC, safety, and radio equipment.
To Next Page
