Need help?Do you have a question about the Multitech MTCAP-868-001A and is the answer not in the manual?
General| Model | MTCAP-868-001A |
|---|---|
| Frequency Band | 868 MHz |
| Wireless Standard | LoRaWAN |
| Max Output Power | 14 dBm |
| Power Supply | PoE |
| Operating Temperature | -20°C to +55°C |
| Interface | Ethernet |
| Antenna Type | Omni-directional |
Details the MTCAP's general, radio frequency, physical, environment, power, and compliance specifications.
Explains how to reset the device to reboot, restore user defaults, or restore factory settings.
Provides instructions on how to insert a micro SIM card into the device.
Details how to connect to the device via SSH and log in using default credentials.
Guides on configuring static IP, DHCP, and internet access via Ethernet.
Instructions for setting up a cellular data link using PPP connection and APN.
Explains how to configure the device to automatically start the cellular connection on boot.
Details how to configure the LoRa network server settings for the device.
Instructions for accessing the device's AEP interface via a web browser.
Guides on changing the default administrator password for security.
Details how to configure the Cellular PPP connection for AEP models.
Guides on configuring username and password for PPP cellular authentication.
Instructions for setting IP address, mask, gateway, and DNS for the Ethernet port.
Steps to save settings, restart the device, and verify the cellular link status.
Details the process of marking drill points and drilling holes for mounting the device.
States compliance with European Community Directives for EMC, safety, and radio equipment.
To Next Page
