Multitech MTCAP-868-001A - Chapter 1 - Product Overview; Overview; Product Build Options; Package Contents

PRODUCT OVERVIEW
MultiConnect
®
Conduit
TM
AP MTCAP User Guide for Europe 5
Chapter 1 – Product Overview
Overview
MultiConnect Conduit AP (MTCAP) connects thousands of IoT assets to the cloud using the LoRaWAN
®
protocol. It
expands LoRa network coverage to difficult to reach areas and is capable of packet forwarding user data between
LoRa end points and a centrally located network server on the cloud, in a data center, or a public network.
Note: Check for an updated version of this document at https://www.multitech.com/brands/multiconnect-
conduit-ap.
Product Build Options
Product Description
MTCAP-LEU1-868-001L MultiConnect Conduit Access Point with LTE and LoRa 868 MHz using
mLinux
MTCAP-868-001L MultiConnect Conduit Access Point with LoRa 868 MHz using mLinux
MTCAP-LEU1-868-001A MultiConnect Conduit Access Point with LTE and LoRa 868 MHz using AEP
MTCAP-868-001A MultiConnect Conduit Access Point with LoRa 868 MHz using AEP
Note: The complete product code may end in .Rx, where R is revision and 1 is the revision number. For
example, MTCAP-LEU1-868-001L-R1.
Package Contents
Your device ships with the following:
1 – MTCAP
1 – 5 Volt, 2.5 Amp Power supply
1 – RJ45 Ethernet cable
1 – Quick Start
Important: Contact MultiTech Systems if a replacement power supply is needed. Using a different power
supply may damage the device and voids the warranty.
Documentation Overview
The following documents are available at http://www.multitech.com/brands/multiconnect-conduit-ap.
Document Description Part Number
MultiConnect Conduit AP MTCAP
mLinux User Guide for Europe
This document. Hardware, regulatory, and
getting started information.
S000652
MultiConnect Conduit AP MTCAP for
mLinux Quick Start
Steps for getting started with mLinux
models. Ships with the device and is
available online.
82102350L