MultiConnect Adapters
Multi-Tech Systems, Inc. Quick Start Guide 3
Introduction
This guide shows you how to setup your MultiConnect. It is available
in the following builds:
Adapter Product Description Region
Serial-to-Serial + IP MTS2SA-T (External Power) Global
Serial-to-Serial + IP MTS2SA-T-R (RS-232 Power) Global
Serial-to-Ethernet + IP MTS2EA (External Power) Global
Serial-to-Ethernet + IP MTS2EA-R (RS-232 Power) Global
The MTS2SA-T-R and MTS2EA-R (RS-232 Powered) Adapters
require power to be supplied into Pin 6 of the female DB9.
MultiConnect Documentation
See the User Guide for more information including product
descriptions and specifications. See the Command Line Interface
Reference Guide for configuration commands and setup examples.
These guides are available on the MultiConnect CD and Multi-
Tech's Web site at www.multitech.com.
Package Contents
• One MultiConnect Device Server
• One universal power supply with power cord included
(Included with the MTS2SA-T build and the MTS2EA build)
• One RS-232 cable
• One mounting bracket
• Four adhesive-backed rubber feet (table-top mounting)
• One Quick Start Guide
• One MultiConnect CD
Handling Precautions
All devices must be handled with certain precautions to avoid
damage due to the accumulation of static charge. Although input
protection circuitry has been incorporated into the devices to
minimize the effect of this static buildup, proper precautions should
be taken to avoid exposure to electrostatic discharge during
handling and mounting.
To Next Page
Loading...
