Multi-Tech Systems, Inc. Quick Start Guide
4
Cabling Your SMSFinder
1. Turn the power off on the PCs and the SMSFinder.
2. Plug one end of a RJ-45 cable into the LAN port on the SMSFinder
and the other end into the Ethernet port on a network-connected
PC.
3. Connect the provided power supply cable to the 9 volt power port
on the back of the SMSFinder, and plug the other end into an AC
power outlet.
4. Attach the cellular antenna.
• Be sure to locate this appliance where there is wireless
coverage.
• The antenna must be attached in order for the SMSFinder to be
operational.
To Next Page
Loading...
