Munchkin Swing - How to Disassemble; How to Use

How to Use
10
HOW TO DISASSEMBLE
1. Pull the release tab out and then lift the seat from the support post.
IMPORTANT: Always set the swing on a at, stable surface. Never use the seat without
safely buckling your child into the harness. Remove the batteries of remote before store.
Store away from children.
1. Raise the swing lock on the back of the
base to prevent the seat from moving.
2. Place the baby into the seat and
then buckle the safety harness.
Adjust the strap length if necessary.
After the baby is secure, release the
swing lock on the back of the base.
Maximum weight 20 lbs (9 kg).
HOW TO USE