To Next Page
M
marissashafferJul 31, 2025
How to fix Muratec Copier when it cannot connect to the network?
- EEdward TownsendAug 1, 2025
If your Muratec Copier cannot connect to the network, there are several things to check: * Ensure the power cable is firmly inserted into both the power socket and the copier. * Verify that the LAN cable is securely connected to the copier and any network devices like LAN hubs or routers. * Confirm that all network devices (LAN hubs, routers, etc.) are powered on. * Inspect the LAN cable and LAN card for any damage; replace them if necessary. * Connect the device to another port to check whether it operates properly. If it does not operate, replace the device. * Also, ensure that the network settings are correctly specified within the machine and network devices. If you replace a device, specify the network settings again.
General
