What causes partially faded images and white spots on Muratec MFX-C2700?
If you're experiencing partially faded images with white spots and lines in solid printing on your Muratec All in One Printer, the issue might be: * Paper being moist or dry: Use paper stored in proper temperature and humidity conditions.
Why are documents received by my Muratec All in One Printer light with vertical streaks?
If documents received by your Muratec All in One Printer are light or have vertical streaks, and the machine is not out of toner, gently wipe the lens surface of the MFP's LED array. Then check to see if the machine is working properly.
Why does speed dial not work on my Muratec MFX-C2700?
If dialing was tried with a Speed Dial/Group Dial number but nothing happened on your Muratec All in One Printer, make sure that the Speed Dial number being used is programmed correctly.
How to fix a very poor image of a received fax on Muratec MFX-C2700?
If the image of a received fax is very poor on your Muratec All in One Printer, try contacting the person sending the fax and ask them to change their fax quality and density settings.
Why was my fax sent from Muratec MFX-C2700 received blank?
If a fax sent from your Muratec All in One Printer was received completely blank, ensure that the document is loaded correctly before faxing; with text face UP in the ADF or face DOWN on the glass.
How to improve poor image quality when faxing with Muratec MFX-C2700 All in One Printer?
If faxing is possible but the image quality of the document printed by the remote machine is very poor when using your Muratec All in One Printer, it may be caused by: * If the faxed document has small type, complex illustrations, photos, or is very light or very dark: try changing the fax density settings.
What does a communications error on my Muratec MFX-C2700 mean?
If your Muratec All in One Printer's display shows a communications error, it could be due to: * Incompatibility with the remote machine, or the remote machine may not be able to perform the function requested. * The remote machine may also be out of paper or experiencing a paper jam. * Bad telephone line conditions can also cause communication errors. Try sending the fax again and check to make sure that the correct telephone number is being dialed.
Why is the glossiness not uniform on prints from my Muratec MFX-C2700 All in One Printer?
If the glossiness isn't uniform on prints from your Muratec All in One Printer, the reason could be: * Incorrect paper settings: Set the correct value of media type and media weight in the Media menu or set one value lighter for media weight.
How to resolve smudged letters on Muratec All in One Printer?
If the periphery of the letters is smudged when printing with your Muratec All in One Printer, the cause might be: * A dirty LED head: Wipe the LED head with a soft, lint-free cloth.
How to fix vertical white lines on Muratec MFX-C2700?
If you're seeing vertical white lines on your printed pages from the Muratec All in One Printer, there are several potential causes: * The LED head might be dirty: wipe it with a soft, lint-free cloth. * The toner could be low: Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the problem continues, replace the toner cartridge. * There might be foreign materials in the image drum: replace the image drum cartridge. * The light-shielding film of the image drum cartridge may be dirty: wipe the film with a soft, lint-free cloth.
General| Brand | Muratec |
|---|---|
| Model | MFX-C2700 |
| Category | All in One Printer |
| Language | English |
Explains online reading using Adobe Reader and navigation of cross-references.
Details procedures for printing the entire manual, individual pages, or specific sections.
Identifies and labels key components visible on the front of the MFP.
Identifies and labels key components visible on the rear of the MFP.
Provides step-by-step instructions for powering on the MFP.
Details the correct procedure for safely shutting down the MFP.
Explains how the MFP enters power saving mode to reduce energy consumption.
Describes the machine's transition to sleep mode for minimal power consumption.
Guides installation of scanner and printer drivers for Windows OS.
Provides instructions for installing printer driver on Mac OS X systems.
Explains installation of fax driver for PC-to-fax functionality.
Details installation and use of Configuration Tool for MFP setup and management.
Describes setup and function of ActKey utility for one-key touch commands.
Lists recommended paper sizes, weights, and types for cassette trays.
Details paper handling capabilities and recommendations for the multi-purpose tray.
Explains the function and capacity of the face-down output stacker.
Describes face-up stacker and its capacity for heavier paper stocks.
Specifies paper weight compatibility for automatic two-sided printing.
Provides instructions for loading paper into standard paper trays.
Details procedure for loading paper into the multi-purpose tray.
Explains how to register loaded paper type, size, and weight in machine settings.
Guides users on registering custom paper sizes for printing.
Describes process for logging into machine using a PIN for access control.
Details steps for logging into machine using username and password.
Illustrates which combinations of tasks the machine performs simultaneously.
Explains loading documents into ADF or onto document glass for scanning/copying.
Lists specifications for documents used with ADF to ensure proper feeding.
Identifies the specific area on documents that can be scanned.
Covers fundamental steps for performing a copy job.
Explains how to adjust the number of copies using the numeric keypad.
Details options to customize copy output, including scan size, duplex, and zoom.
Explains how to reset copy settings to default values via the RESET/LOGOUT button.
Guides scanning documents and sending them directly via email.
Explains scanning documents and sending them to a network PC or server.
Details scanning documents directly to a USB memory device.
Describes scanning documents and saving them to a local computer via ActKey utility.
Explains how to initiate scans from a PC to the MFP.
Covers creating and deleting profiles for Scan To Network PC.
Guides on managing the address book, creating email templates, and handling entries and groups.
Explains how to view and cancel print jobs from the job list.
Provides overview of selecting and printing stored or encrypted jobs.
Guides on printing files directly from a USB memory device.
Details changing machine's print status between online and offline modes.
Details basic operation for sending a fax directly from the MFP.
Covers advanced fax transmission options like speed dial, group lists, resolution.
Covers receiving modes, fax job management, and phone book operations.
Provides instructions for sending faxes over the internet from a PC.
Explains enabling continuous scanning for multiple document sets.
Describes programming and using short cuts for routine copy, fax, or scan jobs.
Details process for replacing consumable items like toner cartridges.
Provides step-by-step instructions for replacing toner cartridges.
Guides replacing image drum assembly, including handling precautions.
Details procedure for replacing transfer belt unit.
Provides instructions for replacing fuser unit, including safety warnings about heat.
Explains cleaning unit casing, LED head, ADF paper path, and ADF underside.
Details cleaning exterior surfaces of the MFP unit.
Guides cleaning LED heads to resolve print quality issues like white lines.
Explains cleaning rollers and paper path within the Automatic Document Feeder.
Details cleaning underside components of the Automatic Document Feeder.
Provides instructions for cleaning document glass for optimal image quality.
Guides installing additional RAM memory boards to increase MFP capacity.
Details replacing and configuring the SD card for expanded storage.
Explains installing and connecting an additional paper tray to the MFP.
Guides updating printer driver settings to recognize newly installed hardware features.
Specific instructions for setting driver options on Windows OS.
Instructions for setting driver options on Mac OS X systems, covering versions.
Explains checking MFP status using the STATUS key on the control panel.
Guides checking device status, consumable life, and job lists via STATUS menu.
Provides detailed instructions for clearing paper jams from ADF and printer sections.
Offers solutions for common printing issues like white lines, fading, and light prints.
Provides solutions for common copying issues like smudged letters and poor glossiness.
Lists common fax problems and their potential solutions for issue diagnosis.
Lists available reports that can be printed from the machine's menu system.
Details settings for paper size, type, and weight for paper trays.
Describes functionality for managing e-mail addresses and groups.
Outlines features for managing speed dial and group dial entries.
Explains creating and managing profiles for network scan destinations.
Details options for storing documents and viewing system information.
Covers shutdown, easy setup, admin setup, and fax setup procedures.
To Next Page
