What causes partially faded images and white spots on Muratec MFX-C2700?
If you're experiencing partially faded images with white spots and lines in solid printing on your Muratec All in One Printer, the issue might be: * Paper being moist or dry: Use paper stored in proper temperature and humidity conditions.
Why are documents received by my Muratec All in One Printer light with vertical streaks?
If documents received by your Muratec All in One Printer are light or have vertical streaks, and the machine is not out of toner, gently wipe the lens surface of the MFP's LED array. Then check to see if the machine is working properly.
Why does speed dial not work on my Muratec MFX-C2700?
If dialing was tried with a Speed Dial/Group Dial number but nothing happened on your Muratec All in One Printer, make sure that the Speed Dial number being used is programmed correctly.
How to fix a very poor image of a received fax on Muratec MFX-C2700?
If the image of a received fax is very poor on your Muratec All in One Printer, try contacting the person sending the fax and ask them to change their fax quality and density settings.
Why was my fax sent from Muratec MFX-C2700 received blank?
If a fax sent from your Muratec All in One Printer was received completely blank, ensure that the document is loaded correctly before faxing; with text face UP in the ADF or face DOWN on the glass.
How to improve poor image quality when faxing with Muratec MFX-C2700 All in One Printer?
If faxing is possible but the image quality of the document printed by the remote machine is very poor when using your Muratec All in One Printer, it may be caused by: * If the faxed document has small type, complex illustrations, photos, or is very light or very dark: try changing the fax density settings.
What does a communications error on my Muratec MFX-C2700 mean?
If your Muratec All in One Printer's display shows a communications error, it could be due to: * Incompatibility with the remote machine, or the remote machine may not be able to perform the function requested. * The remote machine may also be out of paper or experiencing a paper jam. * Bad telephone line conditions can also cause communication errors. Try sending the fax again and check to make sure that the correct telephone number is being dialed.
Why is the glossiness not uniform on prints from my Muratec MFX-C2700 All in One Printer?
If the glossiness isn't uniform on prints from your Muratec All in One Printer, the reason could be: * Incorrect paper settings: Set the correct value of media type and media weight in the Media menu or set one value lighter for media weight.
How to resolve smudged letters on Muratec All in One Printer?
If the periphery of the letters is smudged when printing with your Muratec All in One Printer, the cause might be: * A dirty LED head: Wipe the LED head with a soft, lint-free cloth.
How to fix vertical white lines on Muratec MFX-C2700?
If you're seeing vertical white lines on your printed pages from the Muratec All in One Printer, there are several potential causes: * The LED head might be dirty: wipe it with a soft, lint-free cloth. * The toner could be low: Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the problem continues, replace the toner cartridge. * There might be foreign materials in the image drum: replace the image drum cartridge. * The light-shielding film of the image drum cartridge may be dirty: wipe the film with a soft, lint-free cloth.
General| Brand | Muratec |
|---|---|
| Model | MFX-C2700 |
| Category | All in One Printer |
| Language | English |
To Next Page
