Advanced network settings > 81
P
RINTING
WITHOUT
PRINTER
DRIVER
(
DIRECT
PRINTING
)
P
RINTING
PDF
S
You can print PDFs without a printer driver. Specify the file you want to print on the web
page and submit it to the machine.
1. Access the machine’s web page and log in as the administrator.
2. Select Direct Print.
3. Select Web Printing.
4. Follow the on-screen instructions to specify the detailed settings.
5. Check the settings and then click OK.
6. Click Print.
C
ONFIGURING
SERVER
TO
PRINT
FILES
ATTACHED
TO
E
-
MAILS
You can print attached files when the machine receives an e-mail.
Configuration for POP
1. Access the machine’s web page and log in as the administrator.
2. Select Admin Setup.
3. Select Network > E-mail > Receive Settings.
4. Select POP3 and then click To STEP2.
5. Follow the on-screen instructions to specify the detailed settings.
NOTE
> It may be necessary to install additional RAM in order to print some PDF
files.
> If you have problems printing a PDF file, open the file in Adobe Reader
and print it.
NOTE
> When you have performed the initial setup described in “Configuring the
network settings” on page 9, the server settings are finished.
> Up to 10 files and a maximum of 8 MB for each file can be printed.
> PDF, JPEG, and TIFF files can be printed.
> It may be necessary to install additional RAM in order to print some PDF
files.
> If you have problems printing a PDF file, open the file in Adobe Reader
and print it.
NOTE
Be sure to specify the correct value for your mail server. If you enable APOP
when your mail server does not support the APOP protocol, e-mails may not
be correctly received.
When you specify a domain name for the mail server, configure the DNS
server in the TCP/IP setting.
To Next Page
Loading...
Need help?
General
