Muratec MFX-C2700 Configuration Guide

Configuring the fax settings > 31
A UTOMATIC REDIAL
You can set the fax to automatically redial if the initial fax transmission fails. The machine
will redial on:
> Line busy
> No answer
> Communication error
To set auto-redial:
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to Admin Setup and press OK.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Done and press OK.
4. Using the Down arrow key, scroll to Fax Setup and press OK.
5. Using the Down arrow key, scroll to Other Settings and press OK.
6. Press OK to select the Redial Tries.
7. Using the keypad, enter the required number of redial attempts (between 0 and 9),
then press OK to confirm.
8. Using the Down arrow key, scroll to Redial Interval and press OK.
9. Using the keypad, enter the required redial interval (between 1 and 5 minutes), then
press OK to confirm.
10. Press the Left arrow key to exit the menu.
R ECEPTION MODE
You can change the way your MFP handles incoming fax transmissions and telephone calls
(if you have a telephone handset connected) depending on your office requirements.
Choose from:
> Fax Ready Mode
> Tel/Fa x Ready Mode
> Ans/Fax Ready Mode
> Tel Ready Mode
> DRD
To change the reception mode:
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to Admin Setup and press OK.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Done and press OK.
4. Using the Down arrow key, scroll to User Install and press OK.
5. Using the Down arrow key, scroll to Reception Mode and press OK.
6. Using the arrow keys, select the required reception mode and press OK.
7. Press the Left arrow key to exit the menu.
The machine behaviour differs depending on the specified reception mode, refer to the
User’s Guide for details.

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English