EasyManua.ls Logo

Muratec MFX-C3035 - User Manual

Muratec MFX-C3035
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Other manuals for Muratec MFX-C3035

Questions and Answers

  • G
    Gail WalkerSep 13, 2025
    Why can't I print the machine status list on my Muratec MFX-C3035?
    • J
      James WilliamsSep 13, 2025
      If you cannot print the machine status list on your Muratec All in One Printer, ensure that at least Tray 1 is loaded with media, is correctly in place, and is secure. Also, check for and clear any media misfeeds.
  • M
    Mary NewtonAug 25, 2025
    Why is reception not possible on my Muratec Fax Machine?
    • D
      Douglas SilvaAug 25, 2025
      If reception is not possible on your Muratec Fax Machine, consider the following: * Ensure the machine is set to automatic reception, or perform the manual reception operation. * If memory is full, load paper if it is empty, and then print the faxes stored in memory. * Check the telephone line connection and connect if disconnected. * If the issue persists, make a copy to check that this machine is operating correctly, and then, if the copy was printed correctly, have the recipient check the condition of their fax machine. * If [Closed Network RX Password] - [Enable] is set to [Yes], faxes can only be received from specific senders. For details, contact the administrator.
  • E
    ericcarterAug 25, 2025
    How to fix blurry faxes from Muratec Fax Machine?
    • T
      Tiffany ButlerAug 26, 2025
      If the fax received from your Muratec Fax Machine is blurry, try the following: * Make sure the document is positioned correctly. * Clean the original glass. * Adjust the density if the text is too faint. * Check the telephone line and try sending the fax again. * Make a copy to check that this machine is operating correctly, and then, if the copy was printed correctly, have the recipient check the condition of their fax machine.
  • T
    Teresa SwansonSep 23, 2025
    How to fix Letter-size paper request when printing with custom paper size on Muratec Copier?
    • S
      Sarah BrownSep 23, 2025
      Change the width of the custom paper size to 21.59 cm, and then try sending the job again.
  • S
    Sara Farmer MDSep 14, 2025
    Why does my Muratec All in One Printer have toner smudges?
    • O
      oconnorsaraSep 14, 2025
      If your Muratec All in One Printer is producing toner smudges or residual images, one or more of the toner cartridges might be defective or installed incorrectly. Remove the toner cartridges and check them for damage. If a cartridge is damaged, replace it.
  • S
    Sara BaileySep 23, 2025
    What to do if Muratec Copier pages are not correctly collated or the print job is canceled while printing from Acrobat Reader?
    • S
      suzannewilsonSep 23, 2025
      If you experience printing errors with Acrobat Reader, print using the preview feature provided by the operating system.
  • D
    Daniel GarciaSep 6, 2025
    Why can't I specify multiple destinations for polling reception on Muratec Fax Machine?
    • W
      William BensonSep 7, 2025
      Multiple destinations cannot be specified for polling reception on your Muratec Fax Machine. Try performing the operation again with only one destination specified.
  • J
    Joanne ArnoldSep 7, 2025
    Why is my Muratec MFX-C3035 All in One Printer power not on?
    • D
      darlene40Sep 7, 2025
      If the Muratec All in One Printer's power is not turning on, first ensure the power cord is securely plugged into the outlet. If it is, try plugging another appliance into the same outlet to check if the outlet is working correctly. Also, make sure the power switch is in the 'I' (on) position. If the issue persists, verify that the power source specifications match those listed in the appendix A, 'Technical Specifications'.
  • W
    William MercadoSep 23, 2025
    Why is the custom paper size different from the set size on my Muratec Copier?
    • N
      nsavageSep 23, 2025
      The custom paper size settings may change slightly due to OS round of errors in unit conversion (for example, 5.80" may change to 5.79%).
  • A
    Angela WilliamsonAug 31, 2025
    Why is the page count off in Muratec Fax Machine transmission report?
    • J
      Joann HernandezAug 31, 2025
      During batch transmissions, the number of document pages indicated in the transmission results report may be different from the number of pages in the transmission if the memory is full on your Muratec Fax Machine.

Summary

Introduction

Getting Acquainted with Your Machine

Provides an overview of the machine and its components.

Part Names

Identifies and illustrates the various parts of the machine.

System Requirements

Outlines the system requirements for using the machine software.

Control Panel and Touch Panel Screens

About the Control Panel

Explains the physical buttons and indicators on the control panel.

Touch panel screens

Describes the functions and layout of the machine's touch screen interface.

User authentication and account track

Details how to configure and use user authentication and account tracking.

Utility Settings

Accessibility

Allows customization of screen display and control panel key operations for accessibility.

Address Registration

Enables registration and viewing of E-mail and fax destinations.

User Settings

Provides user-configurable settings for machine operation.

Admin Settings

Allows machine administrators to configure advanced settings and security.

Media Handling

Print Media

Details the specifications for various types of printable media.

Loading Media

Provides step-by-step instructions for loading various media types into the trays.

About Duplex Printing

Explains the functionality and settings for double-sided printing.

Original Media

Details specifications for documents placed on the glass or in the ADF.

Loading a Document

Instructions for placing documents on the original glass.

Loading a document into the ADF

Steps for loading documents into the automatic document feeder.

Using the Printer Driver

Selecting Driver Options;Defaults (for Windows)

Guides on verifying and changing default printer driver settings.

Uninstalling the Printer Driver (for Windows)

Provides instructions for removing the printer driver software.

Displaying Printer Driver Settings (for Windows)

Explains how to view and access printer driver settings.

Using the Postscript, PCL and XPS Printer Driver

Details common buttons and functions within the printer driver interface.

Proof;Print, External Memory, and ID & Print Functions

Proof;Print

Allows printing or deleting jobs saved on the hard disk.

External Memory

Enables printing files from a connected USB memory device.

ID & Print

Allows printing jobs saved with user authentication.

Performing Copy Mode Operations

Basic copy operation

General procedure for making copies using default or specified settings.

Original Size

Specifies the size of the document for copying.

Paper

Selects paper size, type, and tray for printing.

Duplex;Combine

Configures double-sided copying and combining multiple pages.

Proof Copy

Prints a single copy for checking settings before a large run.

ID Copy

Scans and prints the front and back of a card on a single page.

Image Quality

Adjusts scan quality settings like background removal and sharpness.

Additional Copy Operations

Interrupting a copy job

Temporarily stops a copy job to change settings or start a new job.

Copy programs

Stores and recalls frequently used copy settings as programs.

Scanning From a Computer Application

Basic Scanning Operation

General steps for scanning documents from a computer application.

Windows TWAIN Driver Settings

Explains settings within the Windows TWAIN scanner driver.

Windows WIA Driver Settings

Explains settings within the Windows WIA scanner driver.

Macintosh TWAIN Driver Settings

Explains settings within the Macintosh TWAIN scanner driver.

Using a Web Service

Guides on setting up and using the machine with Web Service scanning.

Scanning with the Machine

Initial settings

Outlines the initial setup for scanning functions.

Performing Scan to E-mail mode operations

Detailed steps for scanning documents and sending them via e-mail.

Specifying document settings

Configures document properties like simplex/duplex and original size.

Specifying scan settings

Configures background, density, resolution, and file settings.

Specifying communication settings

Sets up communication parameters for e-mail transmission.

Specifying destinations

Explains various methods to select scan destinations.

Performing Scan to Folder mode operations

Detailed steps for scanning documents and sending them to a folder.

Registering destinations

Procedures for registering address book, group, and program destinations.

Replacing Consumables

About Toner Cartridges

Information about toner cartridges and handling precautions.

Replacing a Toner Cartridge

Detailed instructions for replacing toner cartridges.

Replacing a Imaging Unit

Step-by-step guide for replacing the imaging unit.

Replacing the Waste Toner Bottle

Instructions for replacing the waste toner bottle.

Replacing the Transfer Belt Unit

Steps for replacing the transfer belt unit.

Replacing the Fuser Unit

Instructions for replacing the fuser unit, including safety precautions.

Antistatic Protection

Safety measures to prevent electrostatic damage to components.

Maintenance

Maintaining the machine

General guidelines for machine care and cleaning.

Media Rollers

Explains how paper dust on rollers can cause misfeeds and how to clean them.

Cleaning the Laser Lens

Instructions for cleaning the machine's laser lenses.

Troubleshooting

Preventing Media Misfeeds

Tips and guidelines to avoid paper misfeeds.

Clearing Media Misfeeds

Instructions for removing misfed media from various locations.

Solving Problems with Media Misfeeds

Table listing symptoms, causes, and solutions for media misfeeds.

Solving Other Problems

Troubleshooting guide for various machine issues.

Solving Problems with Printing Quality

Guide to diagnose and resolve printing quality issues.

Status, error and service messages

Explains messages displayed on the control panel and their solutions.

Installing Accessories

Lower Feeder Unit PF-P08

Information about the optional lower feeder unit.

Working Table WT-P01

Details about the optional working table accessory.

Authentication Unit (IC Card Type)

Using authentication device (IC card type)

Explains how to use the IC card authentication system.

Configuring this machine

Steps to configure user authentication settings via Web Connection.

Registering a user

Procedures for registering users and their IC cards using Data Administrator.

Logging in to this machine

Explains how to log in using IC card authentication.

Appendix

Technical specifications

Lists detailed technical specifications of the machine.

Consumable Life Expectancy Chart

Information on the expected lifespan of consumables.

Text input

Explains how to enter text using the on-screen keyboard.

Muratec MFX-C3035 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print Speed (Black)35 ppm
Print Speed (Color)35 ppm
Max Print Resolution1200 x 1200 dpi
Scan TypeFlatbed, ADF
Scan Resolution600 x 600 dpi
Copy Speed (Black)35 cpm
Copy Speed (Color)35 cpm
Fax Modem Speed33.6 Kbps
Monthly Duty Cycle120, 000 pages
Paper Capacity (Standard)500 sheets
Display7-inch color touch panel
Copy Resolution600 x 600 dpi
Fax Transmission Speed3 seconds per page
Supported Operating SystemsWindows, Mac OS
ConnectivityEthernet, USB 2.0
InterfaceUSB, Ethernet

Related product manuals