Muratec MFX-C3035 - User Manual

Other manuals for Muratec MFX-C3035

Reference Guide508 pages

Brochure6 pages

Quick Guide42 pages

Questions and Answers

E
ericcarterAug 25, 2025
How to fix blurry faxes from Muratec Fax Machine?
- T
  Tiffany ButlerAug 26, 2025
  If the fax received from your Muratec Fax Machine is blurry, try the following: * Make sure the document is positioned correctly. * Clean the original glass. * Adjust the density if the text is too faint. * Check the telephone line and try sending the fax again. * Make a copy to check that this machine is operating correctly, and then, if the copy was printed correctly, have the recipient check the condition of their fax machine.
M
Michele MartinezAug 26, 2025
What to do if the memory is full on Muratec Fax Machine?
- K
  Kelly AlexanderAug 27, 2025
  If the memory is full on your Muratec Fax Machine, send the scanned document pages if you are sending a fax. Otherwise, send the fax manually. If you are receiving a fax, print the received documents saved in the memory.
M
Michael ThompsonAug 27, 2025
What to do if Muratec Fax Machine sends blank faxes?
- J
  Jason HowellAug 27, 2025
  If the fax received by the recipient is blank when using your Muratec Fax Machine, ensure the document is loaded facing up when using the ADF.
R
Robert SuarezAug 27, 2025
Why Muratec Fax Machine print processing finished, but transmission does not start?
- K
  Kenneth GutierrezAug 28, 2025
  If print processing on the computer finished, but transmission does not start on your Muratec Fax Machine, you can try the following: * Check the specified printer name. * Make sure that the cable is correctly connected. * Check the control panel of this machine. * From the control panel of this machine, check the Job screen for the processing order for the job. * Enter the correct account name and password. * Enter the correct user name and password. * Check whether a test page can be sent. * Contact your administrator. * Contact your administrator.
C
Collin ContrerasAug 28, 2025
Why is the received fax blank on my Muratec Fax Machine?
- S
  steveosborneAug 28, 2025
  If the received fax is blank on your Muratec Fax Machine, check that the machine can make clean copies. If it can, have the caller send the fax again. Also, the caller may have loaded the pages backward, so contact the caller.
T
Tanner ChavezAug 29, 2025
How to fix document scanned at an angle on Muratec Fax Machine?
- D
  Daniel RiosAug 29, 2025
  If the document is scanned at an angle on your Muratec Fax Machine, slide the document guides to fit the width of the document.
J
Justin KeyAug 30, 2025
What to do if Muratec Fax Machine doesn't scan document?
- A
  amy41Aug 30, 2025
  If the document is not scanned on your Muratec Fax Machine because it is too thick, too thin, or too small, use the original glass to send the fax.
S
Shelley GeorgeAug 23, 2025
Why is transmission not possible on my Muratec Fax Machine?
- K
  Kimberly GrahamAug 23, 2025
  If transmission is not possible on your Muratec Fax Machine, consider the following: * Ensure the transmission procedure was performed correctly and try again. * Verify the fax number is correct. * Confirm that any address book, group, or program destinations are registered correctly. * Check the telephone line connection and connect if disconnected. * Contact the recipient to ensure their machine is functioning correctly. * Verify the dialing method setting matches the telephone line being used in the [Comm. Settings] screen. * If using [Password TX] or [F-Code TX], ensure the correct password is used. * If [TX Confirm CSI] is set to [Yes], have the recipient check that their fax number is correctly specified on their machine.
J
Julia MillsAug 31, 2025
How to solve Muratec Fax Machine 'Printer is not connected' error?
- A
  Anthony JohnsonSep 1, 2025
  If the message “Printer is not connected” or “Print Error” appears on the computer screen while using your Muratec Fax Machine, check the specified printer name. Also, check that the cable is correctly connected. Check the control panel of this machine, and whether a test page can be sent.
B
Brandy RodriguezSep 1, 2025
What does incorrect Sub address mean on Muratec Fax Machine?
- C
  Cheryl JohnsonSep 1, 2025
  If an incorrect Sub address is received, a communication error occurs and the fax cannot be received on your Muratec Fax Machine. Have the sender check the Sub address on their fax machine.

Summary

Introduction

Getting Acquainted with Your Machine

Provides an overview of the machine and its components.

Part Names

Identifies and illustrates the various parts of the machine.

System Requirements

Outlines the system requirements for using the machine software.

Control Panel and Touch Panel Screens

About the Control Panel

Explains the physical buttons and indicators on the control panel.

Touch panel screens

Describes the functions and layout of the machine's touch screen interface.

User authentication and account track

Details how to configure and use user authentication and account tracking.

Utility Settings

Accessibility

Allows customization of screen display and control panel key operations for accessibility.

Address Registration

Enables registration and viewing of E-mail and fax destinations.

User Settings

Provides user-configurable settings for machine operation.

Admin Settings

Allows machine administrators to configure advanced settings and security.

Media Handling

Print Media

Details the specifications for various types of printable media.

Loading Media

Provides step-by-step instructions for loading various media types into the trays.

About Duplex Printing

Explains the functionality and settings for double-sided printing.

Original Media

Details specifications for documents placed on the glass or in the ADF.

Loading a Document

Instructions for placing documents on the original glass.

Loading a document into the ADF

Steps for loading documents into the automatic document feeder.

Using the Printer Driver

Selecting Driver Options;Defaults (for Windows)

Guides on verifying and changing default printer driver settings.

Uninstalling the Printer Driver (for Windows)

Provides instructions for removing the printer driver software.

Displaying Printer Driver Settings (for Windows)

Explains how to view and access printer driver settings.

Using the Postscript, PCL and XPS Printer Driver

Details common buttons and functions within the printer driver interface.

Proof;Print, External Memory, and ID & Print Functions

Proof;Print

Allows printing or deleting jobs saved on the hard disk.

External Memory

Enables printing files from a connected USB memory device.

ID & Print

Allows printing jobs saved with user authentication.

Performing Copy Mode Operations

Basic copy operation

General procedure for making copies using default or specified settings.

Original Size

Specifies the size of the document for copying.

Paper

Selects paper size, type, and tray for printing.

Duplex;Combine

Configures double-sided copying and combining multiple pages.

Proof Copy

Prints a single copy for checking settings before a large run.

ID Copy

Scans and prints the front and back of a card on a single page.

Image Quality

Adjusts scan quality settings like background removal and sharpness.

Additional Copy Operations

Interrupting a copy job

Temporarily stops a copy job to change settings or start a new job.

Copy programs

Stores and recalls frequently used copy settings as programs.

Scanning From a Computer Application

Basic Scanning Operation

General steps for scanning documents from a computer application.

Windows TWAIN Driver Settings

Explains settings within the Windows TWAIN scanner driver.

Windows WIA Driver Settings

Explains settings within the Windows WIA scanner driver.

Macintosh TWAIN Driver Settings

Explains settings within the Macintosh TWAIN scanner driver.

Using a Web Service

Guides on setting up and using the machine with Web Service scanning.

Scanning with the Machine

Initial settings

Outlines the initial setup for scanning functions.

Performing Scan to E-mail mode operations

Detailed steps for scanning documents and sending them via e-mail.

Specifying document settings

Configures document properties like simplex/duplex and original size.

Specifying scan settings

Configures background, density, resolution, and file settings.

Specifying communication settings

Sets up communication parameters for e-mail transmission.

Specifying destinations

Explains various methods to select scan destinations.

Performing Scan to Folder mode operations

Detailed steps for scanning documents and sending them to a folder.

Registering destinations

Procedures for registering address book, group, and program destinations.

Replacing Consumables

About Toner Cartridges

Information about toner cartridges and handling precautions.

Replacing a Toner Cartridge

Detailed instructions for replacing toner cartridges.

Replacing a Imaging Unit

Step-by-step guide for replacing the imaging unit.

Replacing the Waste Toner Bottle

Instructions for replacing the waste toner bottle.

Replacing the Transfer Belt Unit

Steps for replacing the transfer belt unit.

Replacing the Fuser Unit

Instructions for replacing the fuser unit, including safety precautions.

Antistatic Protection

Safety measures to prevent electrostatic damage to components.

Maintenance

Maintaining the machine

General guidelines for machine care and cleaning.

Media Rollers

Explains how paper dust on rollers can cause misfeeds and how to clean them.

Cleaning the Laser Lens

Instructions for cleaning the machine's laser lenses.

Troubleshooting

Preventing Media Misfeeds

Tips and guidelines to avoid paper misfeeds.

Clearing Media Misfeeds

Instructions for removing misfed media from various locations.

Solving Problems with Media Misfeeds

Table listing symptoms, causes, and solutions for media misfeeds.

Solving Other Problems

Troubleshooting guide for various machine issues.

Solving Problems with Printing Quality

Guide to diagnose and resolve printing quality issues.

Status, error and service messages

Explains messages displayed on the control panel and their solutions.

Installing Accessories

Lower Feeder Unit PF-P08

Information about the optional lower feeder unit.

Working Table WT-P01

Details about the optional working table accessory.

Authentication Unit (IC Card Type)

Using authentication device (IC card type)

Explains how to use the IC card authentication system.

Configuring this machine

Steps to configure user authentication settings via Web Connection.

Registering a user

Procedures for registering users and their IC cards using Data Administrator.

Logging in to this machine

Explains how to log in using IC card authentication.

Appendix

Technical specifications

Lists detailed technical specifications of the machine.

Consumable Life Expectancy Chart

Information on the expected lifespan of consumables.

Text input

Explains how to enter text using the on-screen keyboard.

Muratec MFX-C3035 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Max Print Resolution	1200 x 1200 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Fax Modem Speed	33.6 Kbps
Monthly Duty Cycle	120, 000 pages
Paper Capacity (Standard)	500 sheets
Display	7-inch color touch panel
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Supported Operating Systems	Windows, Mac OS
Connectivity	Ethernet, USB 2.0
Interface	USB, Ethernet