Initial settings10-2
Initial settings
This machine is equipped with scanning functions for saving data on this
machine’s hard disk or on a USB memory device, and with network scanning
functions for sending scanned image data through the network with E-mail
transmissions, FTP transmissions, SMB transmissions, WebDAV transmis-
sions and Web Service transmissions.
îš„ In order to perform an FTP transmission, a connection to the network is
required, and parameters must be specified on the [TCP/IP] and [FTP]
screens.
îš„ In order to perform an SMB transmission, a connection to the network is
required, and parameters must be specified on the [TCP/IP] and [SMB]
screens.
îš„ In order to perform a WebDAV transmission, a connection to the network
is required, and parameters must be specified on the [TCP/IP] and [Web-
DAV] screens.
îš„ In order to perform a Web Service transmission, a connection to the net-
work is required, and parameters must be specified on the [TCP/IP] and
[WSD Print] screens.
îš„ In order to perform an E-mail transmission, a connection to the network is
required, parameters must be specified on the [TCP/IP] and [SMTP]
screens, and an E-mail address must be registered for [Administrator
Registration].
îš„ For details on specifying network settings, refer to the [Reference Guide].
Useful functions
îš„ The destinations (recipients) for scan data can be registered as address
book destinations or group destinations.
îš„ The destination and scan settings can be registered together as a single
program. This is convenient for frequently scanning documents and send-
ing data under the same conditions.
To Next Page
Loading...
Need help?
General
