[Admin Settings] 3-41
3 Type in the administrator password (default:12345678).
" If the administrator password (default:12345678) is incorrectly
entered three times, machine operations are locked. If this occurs,
turn the machine off, then on again.
4 Press [OK].
[Machine Settings]
" All factory default values are shown in bold.
Item Description
[Sleep Time Setting] Settings [5 min.] / [6 min.] / [7 min.] / [8 min.]
/ [9 min.] / [10 min.] / [11 min.] / [12
min.] / [13 min.] / [14 min.] / [15
min.] / [30 min.] / [1 Hour] / [3
Hours]
Specify the length of time until the machine
enters Power Save mode.
[Date & Time Settings] Specify the date, time and time zone.
[Date (XX.XX.XX)] Specify the current date.
" The default setting is set in the order
month, day, then year (MM.DD.YY) for
120V model, month, then year
(DD.MM.YY) for 220V model (Europe),
and year, month, then day (YY.MM.DD)
for 220V model (Asia and China).
[Time] Specify the current time.
[Time Zone] Settings -12:00 to +13:00 (Default: 00:00)
The time zone can be set between -12:00 and
+13:00 (in 30-minute increments). The time dif-
ference for Japan is +9:00.
To Next Page
Loading...
Need help?
General
