Performing Scan to E-mail mode operations10-12
Specifying communication settings
The [Communication] parameters available from the [Settings] screen can be
used to specify settings for E-mail transmissions.
[Binary Division]
Select whether or not transmission data is divided.
[E-mail Encryption]
[Send Use Signature]
[E-mail]
Specify the subject and address of E-mail messages.
Item Description
[ON] Select this setting to divide transmission data.
[OFF] Select this setting to not divide transmission
data.
[Admin. Setting] The setting specified with [Admin Settings] -
[Ethernet] - [Binary Division] is given priority.
Description
Settings [ON] / [OFF]
Specify settings for E-mail encryption.
Description
Settings [ON] / [OFF]
Select whether or not a digital signature is applied to E-mail
messages.
Item Description
[File Name] Type in the document name for the scan data.
[Subject] Type in the subject for E-mail messages.
To Next Page
Loading...
Need help?
General
