Print Media4-10
Single Side Only
Print on the single side only.
You can print continuously with single side only paper. However, this could
affect the media feed, depending on the media quality and printing environ-
ment. If problems occur, stop the continuous printing and print one sheet at a
time.
Select this setting when paper that should not be used with double sided
copying (for example, when on side has already been printed on) is loaded as
plain paper with a weight of 60–90 g/m².
Use single side only paper that is
îš„ Suitable for plain paper laser printers, such as standard or recycled office
paper
îš„ Plain paper that has been printed on with same printer
DO NOT use single side only paper that is
îš„ Not approved for use as plain paper
Orientation Tray 1 Face down
Tray 2 Face up
Driver
Media Type
Glossy 1 (100–128 g/m
2
)
Glossy 2 (129–158 g/m
2
)
Weight
100 to 158 g/m
2
Duplexing Not supported
Capacity Tray 1 Up to 100 sheets, depending on the paper
weight.
Tray 2 Up to 250 sheets, depending on the paper
weight.
Tray 3/4 Up to 500 sheets, depending on the paper
weight.
Orientation Tray 1 Face down
Tray 2/3/4 Face up
Driver
Media Type
Single Side Only (60–90 g/m²)
Weight 60–90 g/m²
Duplexing Not supported
To Next Page
Loading...
Need help?
General
