Configuring the network settings > 12
S
ETTING
THE
E
-
MAIL
ADDRESS
FOR
YOUR
MACHINE
Enter an e-mail address to be used by your machine in the “Setup Information Form,” on
page 9.
> If the e-mail address for your machine is specified by the network administrator,
enter the email address in B-1.
> If you are using an Internet Service Provider, obtain an e-mail address for your
machine from the provider and then enter the e-mail address in B-1.
> If the e-mail address for your machine is neither specified nor obtained, determine
the e-mail address according to the value you entered in authentication method:
> If authentication method is “SMTP”, determine an e-mail address and enter it
in B-1.
> If authentication method is “POP”, enter the same e-mail address as B-12 in
B-1.
NOTE
If you want your machine to receive e-mail, you must obtain an e-mail
address for your machine from a network administrator or your Internet
Service Provider.
To Next Page
Loading...
Need help?
General
